Abocom RE450 Installationsanleitung PDF herunterladen (Seite 64)

500 ZENworks for Desktops 4.0.1 Administration Guide

Novell Confidential Manual (99a) 28 October 2003

Imaging Server (Imgserv.nlm or .dll or .dlm)

The imaging server is a software component of the ZfD server. It enables imaging clients

(computers that are booted from an imaging device) to connect with the network to receive

imaging services, including:

 Storage or retrieval of an image on a server

 Automatic imaging based on an NDS/eDirectory policy or setting

 Logging of the results of an imaging operation

 A multicast imaging session

The imaging server modules are located on a NetWare server in sys:\system or on a Windows

server in the folder where NDS or eDirectory is installed (such as c:\novell\nds).

clients=count The number of participating computers that must register with the master before imaging will begin. The option

only applies for session masters.

If you omit this parameter, the imaging engine waits for the master user to press

g. After imaging has begun,

any participating computers attempting to register are denied.

t=minutes The number of minutes the master computer will wait for the next participant to register before starting the

imaging process without reaching count registered participants. The option only applies for session masters.

If you omit this parameter, the imaging process won’t start until count is reached or the master user presses

After that, any participants attempting to register are denied.

Example Explanation

img session doug Starts a multicast session named doug. Each successive computer that issues this same

command before the imaging begins joins the session. Imaging doesn’t start until one of the users

presses m to designate himself as master and presses g to start the imaging, or the imaging

session is started from the imaging server by selecting Manually Start Multicast > providing the

required information > selecting Yes.

img session doug m Starts a multicast session named doug and designates this computer as the master. Each

successive computer that issues img session doug before the imaging begins joins the session

as a participant. Imaging doesn’t start until the master user presses

img session doug c=5 Starts a multicast session named doug. Each successive computer that issues img session

doug

before the imaging begins joins the session. Imaging doesn’t start until one of the users

presses m to designate himself as master, or until the imaging session is started from the imaging

server by selecting Manually Start Multicast > providing the required information > selecting Yes.

Five other computers must also register as participants before the session begins.

img session doug c=5

t=20

Starts a multicast session named doug. Each successive computer that issues img session

doug

before the imaging begins joins the session. Imaging doesn’t start until one of the users

presses

m to designate himself as master, or until the imaging session is started from the imaging

server by selecting Manually Start Multicast > providing the required information > selecting Yes.

Either five other computers must register as participants or more than 20 minutes must elapse

between any consecutive participant registrations, whichever occurs first, and then the session will

begin.

Parameter Specifies

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 77 78

Kommentare zu diesen Handbüchern

Keine Kommentare

Abocom RE450 Installationsanleitung Seite 64

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Abocom RE450