Abocom BCH110 Bedienungsanleitung PDF herunterladen

BHC110 -- Bluetooth Headset

Quick Installation Guide

Buttons

Starting to Use

How to Charge

Plug the charger into the headset. Plug the other

end of the charger into an electrical outlet. During the

charging, the red LED turns on and remains on until

charging is complete. When charging is complete (red

LED is off), remove the charger form the electrical

outlet and detach the charger from the speaker.

Pairing Your Headset and Phone

Before you can use your Bluetooth headset you’re

your phone it has to be added once to the phone.

Follow the instruction form the phone user guide on

how to turn on the Bluetooth in your phone. With the

headset and phone in close proximity:

1. Make sure the headset is in power off. Press the

power button for 6 seconds until the blue and red

LED flashes.

2. Initiate the pairing sequence using hands-free

mode if available. The unit may also be paired in

headset mode if hands-free mode is not available.

3. Perform a device discovery from the phone.

For details on device discovery for your phone,

refer to the user guide for the phone

4. Select the Mono Headset from the discovered

devices list, and then confirm following the on

screen prompts.

5. When prompted by the phone, enter the passkey

0000, and then confirm to pair the headset with

the phone.

Controlling Headset Volume

Increase: Press the volume button in the + position

repeatedly until you reach the desired volume level.

Decrease: Press the volume button in the - position

repeatedly until you reach the desired volume level.

Placing and Receiving Calls

Your headset supports both Hands-free and

Headset Profiles. Accessing call functions depends on

which profile your phone supports.

Action Function

Very Long Press Power Pairing

Power On

Power Off

Long Press Power

Reject a Call

Receive a Call

End a Call

Short Press Power

Voice Dial

Redial

Long Press Redial

Call Transfer

Mute On

Short Press Redial

Mute Off

Using Your Headset Indicators

LED Headset

OFF Power Off

Red/Blue rapid flashes Pairing mode

Blue flashes Power On

Red On Charging

Red flashes Power Low

Red flashed 5 times Powering Off

1 2

Inhaltsverzeichnis

Seite 1 - Starting to Use

BHC110 -- Bluetooth Headset Quick Installation Guide Buttons Starting to Use How to Charge Plug the charger into the headset. Plug the other end of

Seite 2 - Troubleshooting

Troubleshooting Q: No connection to phone A: Make sure the headset is charged and within range of the phone. Check or redo the Bluetooth setting in th

Kommentare zu diesen Handbüchern

Keine Kommentare

Abocom BCH110 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ladegeräte für mobile Geräte Abocom BCH110 herunter. Abocom BCH110 User's Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern